ABB产品-电气行业

1SFC132104M0201 | Application manual: Waste water pump | Set-up 15 4.2 Basic Set-up and application Set-up Path in menu: Menu u Assistants For navigation, see Figure 16. For more details on how to set Basic set-up, Application set-up or more information about Assistants and Application list, see 1SFC132081M0201 - Softstarters Type PSTX30...PSTX370, Installation and Commissioning Manual available on: http://new.abb.com/low-voltage/ products/softstarters The Assistants menu contains predefined settings and parameters. This should be used if an easy and quick setup is required. Only a few parameters have to be set before a start of the motor is possible. All necessary input data will show up in an automatic loop. The Assistants menu is divided in: • Basic set-up • Application set-up INFORMATION After selecting an application and performing the desired setting, the application should not be selected again. If this is done, all the settings will be reset to the default settings for the selected application. Enter the Assistants menu Find the Assistants menu by pressing “Menu” and select Assistants with the Navigation keys. Press “Select” to enter the Assistants menu. Basic set-up Use the Navigation keys to select Basic set-up. Press “Select” to enter the Basic set-up. The Basic set-up menu is divided in 5 steps: Language, Date and time, Motor data, System configuration and Setup complete. 4.3 Application set-up The Application set-up are quick settings for Applications, Values and Tune settings. Use the Navigation keys to select Application set-up. Press “Select” to enter the Application set-up. Select what type of application the softstarter is used for by pressing “Select”. See Figure 17. For set-up of a typical waste water pump, choose Centrifugal pump and change settings to Recommended values . Figure 16: Assistants navigation Basic set-up Application set-up MENU Parameters Assistants Motor jog Event log Backup handling System info Settings 17 1SFC132081M0201 Figure 17: Application set-up Local PSTX Application set-up 1(4) Band saw Bow thruster Centrifugal pump Circular saw Conveyor belt short Done 12:00 Select 3