ABB产品-电气行业

1SFC132104M0201 | Application manual: Waste water pump | Connection 13 3.2.5 Connecting line contactor and Run pilot light The output relay gives a signal depending on the selected function. K4 is set to Run by default. Connect the cables for controlling the line contactor to terminal 4 and 5 for NO control of the contactor. See Figure 12. Connect the green Run pilot light parallel to the supply voltage for the line contactor, e.g. by using an auxiliary contact block to the line contactor. Tightening torques and cable dimensions. 3.2.6 Connecting Event pilot light The output relay gives a signal depending on the selected function. K6 is set to Event by default. Connect the cables for the yellow Fault and Protection pilot light to terminal 10 and 11 for NO control of the pilot light. See Figure 13. Tightening torques and cable dimensions. 3.2.7 Extension I/O for extra inputs and outputs (optional) If more inputs and outputs are needed, connect accessory DX111-FBP.0 (1SAJ611000R0101) from ABB. This will give additional: • 8 digital input • 4 ouput relay • 1 analog output The cables shall be connected to terminals 23, 24, 28 and 30. See Figure 14. Tightening torques and cable dimensions. 0,2 .. 2,5 mm 2 2x0,2 .. 1,5 mm 2 0,2 .. 2,5 mm 2 2x0,2 .. 1,5 mm 2 AWG 12 ... 24 0,5 Nm 4,3 lb.in 3,5 x 0,6 mm (0.138 x 0.024 in) M3 23 24 25 26 27 T1 T2 T3 28 29 30 +(B) -(A) +24V + GND Analog out Temp In Com 3 1SFC132081M0201 12 1SFC132081M0201 Figure 12: Programmable output relay K4, terminals 4, 5 and 6 0,2 .. 2,5 mm 2 2x0,2 .. 1,5 mm 2 0,2 .. 2,5 mm 2 2x0,2 .. 1,5 mm 2 AWG 12 ... 24 0,5 Nm 4,3 lb.in 3,5 x 0,6 mm (0.138 x 0.024 in) M3,5 L 100-250V 50/60 Hz K4 K5 K6 Start Stop In0 In1 In2 GND +24V N 1SFC132081M0201 13 1SFC132081M0201 Figure 13: Programmable output relay K6, terminals 10, 11 and 12 0,2 .. 2,5 mm 2 2x0,2 .. 1,5 mm 2 0,2 .. 2,5 mm 2 2x0,2 .. 1,5 mm 2 AWG 12 ... 24 0,5 Nm 4,3 lb.in 3,5 x 0,6 mm (0.138 x 0.024 in) M3 L 100-250V 50/60 Hz K4 K5 K6 Start Stop In0 In1 In2 GND +24V N 1SFC132081M0201 14 A 23 24 25 26 27 T1 T2 T3 28 29 30 +(B) -(A) +24V + GND Analog out Temp In Com3 1SFC132081M0201 Figure 14: Extension I/O 2